Laminate Floor Reviver
- Revives the protective layer of the laminate.
- Reduces long term wear and tear.
- Non-slip protective finish.
- Fills and hides superficial scratches.
- Dries in 30 minutes.
Preparation
Ensure the floor is clean, dry and dust free. If required, clean the surface with Libéron Laminate Clean and Seal.
Application
Apply a thin coat of the Laminate Reviver evenly to the floor using a sponge, mop or floor cloth and allow to dry for a minimum of 30 minutes. On heavy traffic areas or badly worn surfaces, apply a second coat once the first coat has dried thoroughly. For a higher shine, apply further coats of Laminate Reviver as above.
Advice
- Maintenance: to ensure the longevity of your laminate, clean it regularly with Laminate Clean and Seal and refresh with Laminate Reviver when the surface looks tired.
- Remove as much of the product as possible from the tools after use. Do not dispose of residues and washing water/solvents in the sink, toilet, sewer, bin, etc., in order to avoid discharge into the environment.